Fabric Protector Savings Pack

protectME fabric & upholstery protector is suitable for most fabrics including cotton, suede, leather, synthetics, wool and silk. protectME is suitable for surfaces inside and outside the home, and for commercial use.

Before applying protectME, vacuum any surfaces thoroughly & remove any existing stains. If you are applying to clothes or shoes, clean in cold water only to remove any traces of detergents or softeners. Be sure to remove any cleaning products prior to application.

How to apply protectME:

• Check your fabric
  Shake well and apply to a small test area for colour fastness. Not all textiles are colourfast.
• Spray away
  Spray an even layer from 15cm in a back & forth motion so that textile becomes moist.
• Wait for it
  Allow a minimum of 12 hours for coating to cure. In temperatures below 18°C allow up to 24 hours.
• Test for coverage
  By spraying a little water on the textile. Small beads should form on the surface. If not, additional application may be required.

The Savings Pack can protect up to 27m² of fabric or 13.5m² if 2 coats are necessary. For more information on how much product to apply, read our FAQs page.

Our products never contain harsh chemicals such as Hydrotreated heavy naphtha (petroleum), Propane/Butane/Isobutane/Ethylbenzene, Octamethylcyclotetrasiloxane, Flammable Aerosol. Most of these are present in traditional stain protectors and are highly toxic to our health and the environment. No parabens, sulphates, phosphates, petrochemicals, chlorine, soap, alcohol or dyes.

For more information, please read our Ingredients page.